All our watch crystal gaskets, essential every time a crystal is replaced. Fitted between the crystal and the bezel or case, the gasket seals the watch and holds the crystal. Here you will find Hytrel I-ring gaskets, sorted by thickness…
Our most versatile reference: Hytrel I-ring gasket, 0.35 mm thick and 0.80 mm high, available in 289 diameters from…
VDJ-HYTREL-035-080
Hytrel I-ring crystal gasket with a 0.35 mm wall and a 0.60 mm height, for crystals with a thin edge. 71 diameters…
VDJ-HYTREL-035-060
Hytrel I-ring gasket 0.40 × 1.25 mm at €2.90 incl. VAT, for thick crystals from small to very large diameters: 68…
VDJ-HYTREL-040-125
Hytrel I-ring gasket, 1.75 mm high with a 0.40 mm wall, for very thick crystals and deep seats. 69 diameters from 16.0…
VDJ-HYTREL-040-175
Hytrel I-ring gasket with a reinforced 0.40 mm wall and a 1.20 mm height, for thick crystals on medium and large…
VDJ-HYTREL-040-120
Hytrel I-ring gaskets, 0.35 mm thick, in non-standard heights from 0.55 to 2.70 mm: 27 diameter and height…
VDJ-HYTREL-HAUTEURS-SPECIALES
Hytrel I-ring gasket, 0.35 mm thick and 1.00 mm high, for thick crystals with a thin gasket wall. 14 diameters from…
VDJ-HYTREL-035-100
Hytrel I-ring gasket 0.35 × 0.90 mm, slightly taller than standard, for crystals whose edge is higher than a 0.80 mm…
VDJ-HYTREL-035-090
Hytrel I-ring gasket, 0.35 mm thick and 0.70 mm high, an intermediate height for thin crystals. 20 diameters from…
VDJ-HYTREL-035-070