Skip to content
Since 2011 Legal 14-day withdrawal Secure SSL Payment Shipped from France Responsive customer service

Flat sapphire crystal 0.9 mm

Reference: verrePLA-SAPH-0-9-21-1-1
€54.90
Tax included
Volume discounts
  • 3+ units → -10% (€49.41 / unit)
  • 10+ units → -30% (€38.43 / unit)
incl. VAT

Flat sapphire crystal, 0.9 mm thick, available in 104 diameters between 21.1 mm and 33.5 mm.

Diameter: 21,1 mm

Measure the old crystal with a caliper (guide). Mineral and sapphire: exact seat diameter. Acrylic: usually 0.1 to 0.2 mm larger. Not sure? Search by dimensions.

Quantity

Free delivery to a pickup point from 49€
Secure Payment
14-day statutory right of withdrawal

The 0.9 mm flat sapphire crystal stands out for its closely spaced range of diameters: 104 sizes between 21.1 mm and 33.5 mm. This density is useful when your measurement falls between two common values and a standard crystal would be too loose or too tight.

Intended use

This range mainly corresponds to medium-sized men's or unisex wristwatches. The 0.9 mm thickness generally suits slim cases whose bezel takes a fairly discreet flat crystal, and is often found on dress watches.

Sapphire: strengths and precautions

Rated 9 on the Mohs scale, sapphire is virtually scratchproof in normal use and keeps its clarity over the years. Bear in mind, however, that:

  • its hardness comes with a certain fragility: a violent impact can crack it where mineral crystal would hold up better;
  • it is generally press fitted, with a gasket in good condition.

Measure before ordering

Using a calliper, measure the diameter of the old crystal to a tenth of a millimetre, at several points to detect any out of roundness. Then measure its thickness: if it is close to 0.9 mm, this model is the right starting point. The full procedure is described in our measuring guide.

All diameters of this item are available to order.

Find your size in the table of diameters below.

Available diameters

DiameterReference
21.1 mmverrePLA-SAPH-0-9-21-1-1
21.2 mmverrePLA-SAPH-0-9-21-2-1
21.3 mmverrePLA-SAPH-0-9-21-3-1
21.4 mmverrePLA-SAPH-0-9-21-4-1
21.5 mmverrePLA-SAPH-0-9-21-5-1
21.6 mmverrePLA-SAPH-0-9-21-6-1
21.7 mmverrePLA-SAPH-0-9-21-7-1
21.8 mmverrePLA-SAPH-0-9-21-8-1
21.9 mmverrePLA-SAPH-0-9-21-9-1
22.0 mmverrePLA-SAPH-0-9-22-1
22.1 mmverrePLA-SAPH-0-9-22-10-1
22.2 mmverrePLA-SAPH-0-9-22-20-1
22.3 mmverrePLA-SAPH-0-9-22-30-1
22.4 mmverrePLA-SAPH-0-9-22-40-1
22.5 mmverrePLA-SAPH-0-9-22-50-1
22.6 mmverrePLA-SAPH-0-9-22-60-1
22.7 mmverrePLA-SAPH-0-9-22-70-1
22.8 mmverrePLA-SAPH-0-9-22-80-1
22.9 mmverrePLA-SAPH-0-9-22-90-1
23.0 mmverrePLA-SAPH-0-9-23-1
23.1 mmverrePLA-SAPH-0-9-23-10-1
23.2 mmverrePLA-SAPH-0-9-23-20-1
23.3 mmverrePLA-SAPH-0-9-23-30-1
23.4 mmverrePLA-SAPH-0-9-23-40-1
23.5 mmverrePLA-SAPH-0-9-23-50-1
23.6 mmverrePLA-SAPH-0-9-23-60-1
23.7 mmverrePLA-SAPH-0-9-23-70-1
23.8 mmverrePLA-SAPH-0-9-23-80-1
23.9 mmverrePLA-SAPH-0-9-23-90-1
24.0 mmverrePLA-SAPH-0-9-24-1
24.1 mmverrePLA-SAPH-0-9-24-10-1
24.2 mmverrePLA-SAPH-0-9-24-20-1
24.3 mmverrePLA-SAPH-0-9-24-30-1
24.4 mmverrePLA-SAPH-0-9-24-40-1
24.5 mmverrePLA-SAPH-0-9-24-50-1
24.6 mmverrePLA-SAPH-0-9-24-60-1
24.7 mmverrePLA-SAPH-0-9-24-70-1
24.8 mmverrePLA-SAPH-0-9-24-80-1
24.9 mmverrePLA-SAPH-0-9-24-90-1
25.0 mmverrePLA-SAPH-0-9-25-1
25.1 mmverrePLA-SAPH-0-9-25-10-1
25.2 mmverrePLA-SAPH-0-9-25-20-1
25.3 mmverrePLA-SAPH-0-9-25-30-1
25.4 mmverrePLA-SAPH-0-9-25-40-1
25.5 mmverrePLA-SAPH-0-9-25-50-1
25.6 mmverrePLA-SAPH-0-9-25-60-1
25.7 mmverrePLA-SAPH-0-9-25-70-1
25.8 mmverrePLA-SAPH-0-9-25-80-1
25.9 mmverrePLA-SAPH-0-9-25-90-1
26.0 mmverrePLA-SAPH-0-9-26-1
26.3 mmverrePLA-SAPH-0-9-26-30-1
26.4 mmverrePLA-SAPH-0-9-26-40-1
26.5 mmverrePLA-SAPH-0-9-26-50-1
26.6 mmverrePLA-SAPH-0-9-26-60-1
26.7 mmverrePLA-SAPH-0-9-26-70-1
26.8 mmverrePLA-SAPH-0-9-26-80-1
26.9 mmverrePLA-SAPH-0-9-26-90-1
27.0 mmverrePLA-SAPH-0-9-27-1
27.1 mmverrePLA-SAPH-0-9-27-10-1
27.2 mmverrePLA-SAPH-0-9-27-20-1
27.3 mmverrePLA-SAPH-0-9-27-30-1
27.4 mmverrePLA-SAPH-0-9-27-40-1
27.5 mmverrePLA-SAPH-0-9-27-50-1
27.6 mmverrePLA-SAPH-0-9-27-60-1
27.7 mmverrePLA-SAPH-0-9-27-70-1
27.8 mmverrePLA-SAPH-0-9-27-80-1
27.9 mmverrePLA-SAPH-0-9-27-90-1
28.0 mmverrePLA-SAPH-0-9-28-1
28.1 mmverrePLA-SAPH-0-9-28-10-1
28.2 mmverrePLA-SAPH-0-9-28-20-1
28.3 mmverrePLA-SAPH-0-9-28-30-1
28.4 mmverrePLA-SAPH-0-9-28-40-1
28.5 mmverrePLA-SAPH-0-9-28-50-1
28.6 mmverrePLA-SAPH-0-9-28-60-1
28.7 mmverrePLA-SAPH-0-9-28-70-1
28.8 mmverrePLA-SAPH-0-9-28-80-1
28.9 mmverrePLA-SAPH-0-9-28-90-1
29.0 mmverrePLA-SAPH-0-9-29-1
29.1 mmverrePLA-SAPH-0-9-29-10-1
29.2 mmverrePLA-SAPH-0-9-29-20-1
29.3 mmverrePLA-SAPH-0-9-29-30-1
29.4 mmverrePLA-SAPH-0-9-29-40-1
29.5 mmverrePLA-SAPH-0-9-29-50-1
29.6 mmverrePLA-SAPH-0-9-29-60-1
29.7 mmverrePLA-SAPH-0-9-29-70-1
29.8 mmverrePLA-SAPH-0-9-29-80-1
29.9 mmverrePLA-SAPH-0-9-29-90-1
30.0 mmverrePLA-SAPH-0-9-30-1
30.1 mmverrePLA-SAPH-0-9-30-10-1
30.2 mmverrePLA-SAPH-0-9-30-20-1
30.3 mmverrePLA-SAPH-0-9-30-30-1
30.4 mmverrePLA-SAPH-0-9-30-40-1
30.5 mmverrePLA-SAPH-0-9-30-50-1
30.6 mmverrePLA-SAPH-0-9-30-60-1
30.7 mmverrePLA-SAPH-0-9-30-70-1
30.8 mmverrePLA-SAPH-0-9-30-80-1
30.9 mmverrePLA-SAPH-0-9-30-90-1
31.0 mmverrePLA-SAPH-0-9-31-1
31.1 mmverrePLA-SAPH-0-9-31-10-1
31.4 mmverrePLA-SAPH-0-9-31-40-1
31.5 mmverrePLA-SAPH-0-9-31-50-1
32.0 mmverrePLA-SAPH-0-9-32-1
32.5 mmverrePLA-SAPH-0-9-32-50-1
33.0 mmverrePLA-SAPH-0-9-33-1
33.5 mmverrePLA-SAPH-0-9-33-50-1
verrePLA-SAPH-0-9-21-1-1

Data sheet

Thickness
0.9 mm
Shape
Flat
Material
Sapphire
Hardness (Mohs)
9