Skip to content
Since 2011 Legal 14-day withdrawal Secure SSL Payment Shipped from France Responsive customer service

Flat sapphire crystal 1.5 mm

Reference: verrePLA-SAPH-1-5-17-00-1
€16.90
Tax included
Volume discounts
  • 3+ units → -10% (€15.21 / unit)
  • 10+ units → -30% (€11.83 / unit)
incl. VAT

Flat 1.5 mm sapphire crystal, available in 47 diameters from 17.0 mm to 45.0 mm.

Diameter: 17,0 mm

Measure the old crystal with a caliper (guide). Mineral and sapphire: exact seat diameter. Acrylic: usually 0.1 to 0.2 mm larger. Not sure? Search by dimensions.

Quantity

Free delivery to a pickup point from 49€
Secure Payment
14-day statutory right of withdrawal

A tougher crystal for sports watches

At 1.5 mm, this flat sapphire offers a comfortable thickness. It generally suits sports watches and medium to large wristwatches, and is often found on cases whose bezel is designed for a thick crystal. The 47 available diameters run from 17.0 mm to 45.0 mm.

Advantages and limitations

Synthetic sapphire rates 9 on the Mohs scale, just behind diamond. The result: a highly scratch resistant crystal that keeps a clean look even on a watch worn every day.

This hardness has a downside. Sapphire is more brittle than mineral crystal under a violent impact: it resists wear, but copes less well with sudden knocks. It is also more expensive. Finally, it is generally press fitted with a gasket: remember to check the gasket's condition; our page on replacing a gasket can help.

Measuring the old crystal

Two measurements are enough, but they must be accurate:

  • the diameter, measured with a calliper across the edge of the crystal, to a tenth of a millimetre;
  • the thickness, to check that 1.5 mm matches the original crystal.

The measuring guide shows how to hold the tool and read the value. To find out whether your current crystal is sapphire, mineral or acrylic, see the types of crystal.

The diameters of this item are available to order.

See the table below to choose your diameter.

Available diameters

DiameterReference
17.0 mmverrePLA-SAPH-1-5-17-00-1
19.0 mmverrePLA-SAPH-1-5-19-1
19.5 mmverrePLA-SAPH-1-5-19-5-1
20.0 mmverrePLA-SAPH-1-5-20-1
20.5 mmverrePLA-SAPH-1-5-20-5-1
21.0 mmverrePLA-SAPH-1-5-21-1
22.0 mmverrePLA-SAPH-1-5-22-1
22.5 mmverrePLA-SAPH-1-5-22-50-1
23.0 mmverrePLA-SAPH-1-5-23-1
24.0 mmverrePLA-SAPH-1-5-24-1
24.5 mmverrePLA-SAPH-1-5-24-50-1
25.0 mmverrePLA-SAPH-1-5-25-1
25.5 mmverrePLA-SAPH-1-5-25-50-1
26.0 mmverrePLA-SAPH-1-5-26-1
26.5 mmverrePLA-SAPH-1-5-26-50-1
27.0 mmverrePLA-SAPH-1-5-27-1
27.5 mmverrePLA-SAPH-1-5-27-50-1
28.0 mmverrePLA-SAPH-1-5-28-1
28.5 mmverrePLA-SAPH-1-5-28-50-1
29.0 mmverrePLA-SAPH-1-5-29-1
29.5 mmverrePLA-SAPH-1-5-29-50-1
30.0 mmverrePLA-SAPH-1-5-30-1
30.5 mmverrePLA-SAPH-1-5-30-50-1
31.0 mmverrePLA-SAPH-1-5-31-1
31.5 mmverrePLA-SAPH-1-5-31-50-1
32.0 mmverrePLA-SAPH-1-5-32-1
32.5 mmverrePLA-SAPH-1-5-32-50-1
33.0 mmverrePLA-SAPH-1-5-33-1
33.5 mmverrePLA-SAPH-1-5-33-50-1
34.0 mmverrePLA-SAPH-1-5-34-1
34.5 mmverrePLA-SAPH-1-5-34-5-1
35.0 mmverrePLA-SAPH-1-5-35-1
35.5 mmverrePLA-SAPH-1-5-35-5-1
36.0 mmverrePLA-SAPH-1-5-36-1
36.5 mmverrePLA-SAPH-1-5-36-5-1
37.0 mmverrePLA-SAPH-1-5-37-1
37.5 mmverrePLA-SAPH-1-5-37-5-1
38.0 mmverrePLA-SAPH-1-5-38-1
38.5 mmverrePLA-SAPH-1-5-38-5-1
39.0 mmverrePLA-SAPH-1-5-39-1
39.5 mmverrePLA-SAPH-1-5-39-5-1
40.0 mmverrePLA-SAPH-1-5-40-1
40.5 mmverrePLA-SAPH-1-5-40-50-1
41.0 mmverrePLA-SAPH-1-5-41-1
41.5 mmverrePLA-SAPH-1-5-41-5-1
42.5 mmverrePLA-SAPH-1-5-42-5-1
45.0 mmverrePLA-SAPH-1-5-45-1
verrePLA-SAPH-1-5-17-00-1

Data sheet

Thickness
1.5 mm
Shape
Flat
Material
Sapphire
Hardness (Mohs)
9