Flat 1.0 mm mineral crystal with a rim around its edge. Available in 27 diameters from 21.0 mm to 34.0 mm, priced from €8.90 to €9.90.
This 1.0 mm mineral crystal stands out for its rim: a raised edge around the perimeter that changes how the crystal sits in the case. It therefore does not replace a plain flat crystal, and vice versa.
Rimmed crystals are often found on watches whose bezel or gasket is designed to take this edge. It generally suits medium-sized watches, with the range running from 21.0 mm to 34.0 mm in 27 diameters. The best approach is to compare with your original crystal: if it has this rim, this is the product to look at. This type of profile calls for careful inspection of the removed crystal, from the side and from the front, before ordering.
Hardness: around 5 to 6 on the Mohs scale. Mineral crystal is far more scratch resistant than acrylic and remains cheaper than sapphire; it does, however, scratch more easily than the latter. To compare, see the types of crystal.
Using a calliper, measure the outer diameter, rim included, across at least two axes.
Measure the thickness of the flat section, which should be 1.0 mm. Also examine the rim to make sure the profile matches.
Step-by-step details are given in our measuring guide.
The table of the 27 diameters is shown just below.
| Diameter | Reference | Price inc. VAT |
|---|---|---|
| 21.0 mm | verrePLA-BD-1-21-01 | €9.90 |
| 21.5 mm | verrePLA-BD-1-21-5-01 | €9.90 |
| 22.0 mm | verrePLA-BD-1-22-01 | €9.90 |
| 22.5 mm | verrePLA-BD-1-22-5-01 | €9.90 |
| 23.0 mm | verrePLA-BD-1-23-01 | €9.90 |
| 23.5 mm | verrePLA-BD-1-23-5-01 | €9.90 |
| 24.0 mm | verrePLA-BD-1-24-01 | €9.90 |
| 24.5 mm | verrePLA-BB-1-24-5-01 | €8.90 |
| 25.0 mm | verrePLA-BD-1-25-01 | €9.90 |
| 25.5 mm | verrePLA-BD-1-25-5-01 | €9.90 |
| 26.0 mm | verrePLA-BB-1-26-01 | €8.90 |
| 26.5 mm | verrePLA-BB-1-26-5-01 | €8.90 |
| 27.0 mm | verrePLA-BD-1-27-01 | €9.90 |
| 27.5 mm | verrePLA-BB-1-27-5-01 | €8.90 |
| 28.0 mm | verrePLA-BD-1-28-01 | €9.90 |
| 28.5 mm | verrePLA-BD-1-28-5-01 | €9.90 |
| 29.0 mm | verrePLA-BB-1-29-01 | €8.90 |
| 29.5 mm | verrePLA-BB-1-29-5-01 | €8.90 |
| 30.0 mm | verrePLA-BD-1-30-01 | €9.90 |
| 30.5 mm | verrePLA-BB-1-30-5-01 | €8.90 |
| 31.0 mm | verrePLA-BB-1-31-01 | €8.90 |
| 31.5 mm | verrePLA-BB-1-31-5-01 | €8.90 |
| 32.0 mm | verrePLA-BB-1-32-01 | €8.90 |
| 32.5 mm | verrePLA-BB-1-32-5-01 | €8.90 |
| 33.0 mm | verrePLA-BD-1-33-01 | €9.90 |
| 33.5 mm | verrePLA-BB-1-33-5-01 | €8.90 |
| 34.0 mm | verrePLA-BB-1-34-01 | €8.90 |
Data sheet
Thickness 4,0 mm
Ø 25 to 50 mm
Flat mineral crystal 4.0 mm
Flat 4.0 mm mineral crystal, the thickest in the range. 51 diameters from 25.0 mm to 50.0 mm, from €5.90 to €13.90…
VDM-MIN-PLAT-400
Thickness 0,7 mm
Ø 12 to 34 mm
Flat mineral crystal 0.7 mm
Very thin flat mineral crystal, 0.7 mm thick. Available in 221 diameters from 12.0 mm to 34.0 mm, priced at €5.90.
VDM-MIN-PLAT-070
Thickness 3,5 mm
Ø 25 to 50 mm
Flat mineral crystal 3.5 mm
Thick flat mineral crystal, 3.5 mm. Available in 51 diameters from 25.0 mm to 50.0 mm, priced from €5.90 to €13.90…
VDM-MIN-PLAT-350
Thickness 1,5 mm
Ø 17 to 50 mm
Flat mineral crystal 1.5 mm
Flat mineral crystal, 1.5 mm thick, with no surface treatment. Available in 176 diameters from 17.0 mm to 50.0 mm,…
VDM-MIN-PLAT-150
Thickness 1,3 mm
Ø 17 to 40 mm
Flat mineral crystal 1.3 mm
Flat mineral crystal, 1.3 mm thick. Available in 191 diameters from 17.0 mm to 40.0 mm, at a single price of €5.90.
VDM-MIN-PLAT-130
Thickness 1,5 mm
Ø 22 to 34 mm
Flat chamfered mineral crystal 1.5 mm
Flat mineral watch crystal with a chamfered edge, 1.5 mm thick. Available in 115 diameters from 22.0 mm to 34.0 mm,…
VDM-MIN-PLATCHANFREINE-150
Thickness 2,0 mm
Ø 17 to 50 mm
Flat mineral crystal 2.0 mm
Flat mineral crystal, 2.0 mm thick. Available in 291 diameters from 17.0 mm to 50.0 mm, at €5.90 each.
VDM-MIN-PLAT-200
Thickness 3,0 mm
Ø 17 to 50 mm
Flat mineral crystal 3.0 mm
Flat mineral crystal, 3.0 mm, for cases that take a thick crystal. 211 diameters available from 17.0 mm to 50.0 mm, at…
VDM-MIN-PLAT-300
Thickness 2,5 mm
Ø 17 to 50 mm
Flat mineral crystal 2.5 mm
Flat mineral crystal, 2.5 mm thick, for watches with a sturdy case. Range of 251 diameters from 17.0 mm to 50.0 mm, at…
VDM-MIN-PLAT-250
Thickness 1,0 mm
Ø 10 to 50 mm
Flat mineral crystal 1.0 mm
Flat mineral watch crystal, 1.0 mm thick. The widest reference in the range, with 369 diameters from 10.0 mm to 50.0…
VDM-MIN-PLAT-100
Thickness 0,8 mm
Ø 10 to 40 mm
Flat mineral crystal 0.8 mm
Thin flat mineral watch crystal, 0.8 mm thick. Available in 301 diameters from 10.0 mm to 40.0 mm, priced at €5.90.
VDM-MIN-PLAT-080
Flat 1.0 mm mineral crystal with a rim around its edge. Available in 27 diameters from 21.0 mm to 34.0 mm, priced from €8.90 to €9.90.
