Acrylic (Hesalite) Watch Crystals: Flat and Domed

There are 6 products.

Sort by:

Show

Showing 1-6 of 6 item(s)

Ø 9.6 to 49.8 mm

Domed acrylic crystal for pocket watches

Domed acrylic crystal designed for pocket watches. It is available in 202 diameters, from 9.6 mm to 49.8 mm, priced…

€7.90

Ø 11 to 31.2 mm

Faceted domed acrylic crystal

Faceted domed acrylic crystal, with a surface cut into several planes. Available in 77 diameters from 11.0 mm to 31.2…

€20.90

Ø 12 to 40 mm

Wide-curve domed acrylic crystal

Wide-curve domed acrylic watch crystal, with a curve extending across the whole surface. Available in 151 diameters…

€5.90

Ø 14 to 35.1 mm

Flat acrylic crystal

Flat acrylic (Plexiglas) watch crystal, with no curve. Available in 212 diameters from 14.0 mm to 35.1 mm, from €8.90…

€19.90

Ø 16.4 to 50 mm

Slightly domed acrylic crystal

Slightly domed acrylic watch crystal with a subtle curve. Available in 169 diameters from 16.4 mm to 50.0 mm, from…

€8.90

Ø 12 to 40 mm

Stepped domed acrylic crystal

Stepped domed acrylic watch crystal, with a step cut into its edge. Available in 141 diameters from 12.0 mm to 40.0…

€11.90

Acrylic, the material of older watches

Often called Plexiglas or hesalite, acrylic is fitted to many antique and vintage watches. It is a soft material: it scratches easily, but it can be polished, restoring its clarity without replacing it. It also has the advantage of flexing slightly when fitted rather than shattering.

This category brings together 11 products and 1271 diameters, from 9.6 to 50 mm, from €5.90 to €20.90 inc. VAT:

Flat and extra-thin, for low-profile watches;
Domed: dome, high dome, low domed, stepped, wide-curve, faceted, lipped, drawing-pin and pocket watch.

The choice is mainly made on the profile: height of the dome, presence of a step or lip around the edge, cut facets. Compare the original crystal with the product images before taking the diameter.

For measuring, follow our guide to measuring a crystal. If your crystal is only dulled, the tutorial on polishing an acrylic crystal may save a replacement. The page on crystal types helps confirm that it really is acrylic.

Frequently asked questions

Are Plexiglas and acrylic the same thing?

Yes, Plexiglas (or hesalite) is the common name for the acrylic crystal used in watchmaking.

Can an acrylic crystal be polished?

Yes, surface scratches fade with polishing. Our video guide explains the method; a crack or chip, however, means the crystal must be replaced.

How can I tell if my crystal is acrylic?

Acrylic is lighter and warmer to the touch than mineral, and it scratches easily. The guide to crystal types gives further clues.

Is a domed crystal measured at the base?

The outer diameter of the crystal is taken at its base, where it sits in the bezel, not at the top of the dome.

What is the difference between flat and extra-thin?

Both have a flat surface; the extra-thin version is intended for watches whose crystal must remain very slim. Compare with the original crystal.