Hytrel I-ring gaskets for pressed-in watch crystals. 0.35 and 0.40 mm thicknesses, heights from 0.55 to 2.70 mm, diameters from 13.3 to 50 mm. Choose the diameter of your crystal, then the thickness and height that suit its seat, and…
Our most versatile reference: Hytrel I-ring gasket, 0.35 mm thick and 0.80 mm high, available in 289 diameters from…
VDJ-HYTREL-035-080
Hytrel I-ring crystal gasket with a 0.35 mm wall and a 0.60 mm height, for crystals with a thin edge. 71 diameters…
VDJ-HYTREL-035-060
Hytrel I-ring gasket 0.40 × 1.25 mm at €2.90 incl. VAT, for thick crystals from small to very large diameters: 68…
VDJ-HYTREL-040-125
Hytrel I-ring gasket, 1.75 mm high with a 0.40 mm wall, for very thick crystals and deep seats. 69 diameters from 16.0…
VDJ-HYTREL-040-175
Hytrel I-ring gasket with a reinforced 0.40 mm wall and a 1.20 mm height, for thick crystals on medium and large…
VDJ-HYTREL-040-120
Hytrel I-ring gaskets, 0.35 mm thick, in non-standard heights from 0.55 to 2.70 mm: 27 diameter and height…
VDJ-HYTREL-HAUTEURS-SPECIALES
Hytrel I-ring gasket, 0.35 mm thick and 1.00 mm high, for thick crystals with a thin gasket wall. 14 diameters from…
VDJ-HYTREL-035-100
Hytrel I-ring gasket 0.35 × 0.90 mm, slightly taller than standard, for crystals whose edge is higher than a 0.80 mm…
VDJ-HYTREL-035-090
Hytrel I-ring gasket, 0.35 mm thick and 0.70 mm high, an intermediate height for thin crystals. 20 diameters from…
VDJ-HYTREL-035-070